Installation Instructions
A Step-by-Step Guide for Smooth Installation
Introduction
This guide provides clear, step-by-step instructions to help you install your Ultratec Home Shield efficiently. Please follow each step carefully to ensure a successful installation process.
1. System Requirements
- Ensure your roof meets the minimum system requirements specified by Cer.
- Check for wet curling lifted or lichen on the roof.
- Verify you are using a qualified roofer for inspections and repairs before applying Ultratec Home Shield.
- Replace missing or damaged shingles.
2. The Installer
- Visit the official website or authorized distribution platform for installation guidelines.
- Locate the download section and select the appropriate installation.
3. Installer
- Make sure all repairs to roof are completed before installing.
- Double check with homeowners to make sure there are no leaks or missing flashing.
- If necessary power wash roof to remove an loose granules or lichen and let dry before application.
- Tape off ridge vents and bath vents (750s) to ensure they are not blocked by roof coatings.
4. Follow the Installation
- Read and install per manufacturers instructions.
- Choose your preferred installation type (roll, brush, or spray).
- Tape off any areas you do not want Ultratec Home Shield applied.
- Proceed with the installation.
5. Complete the Installation
- When the installation is complete coating should be no less than 20 mills and all shingle edges completely sealed.
- It is recommended that two layers of coating be applied.
- Use airless spray gun 50 to 80 psi brush or foam rollers.
6. The Application process
- Always use PPE (personal protective equipment) when installing Ultratec Home Shield, including safety glasses, gloves, respirator, and a Tyvek suit. Do not allow the product to come into contact with skin, eyes, or mouth.
- Start at the top and work your way down, finishing toward your ladder for safe exit.
- Follow all initial safety setup procedures and establish best practices for job-site safety.
- Remove any tape as soon as possible after application.
- Always tie off when working on roofs per OSHA requirements, and follow all OSHA rules and regulations.
- Do not walk on the coating while it is wet, as this could cause serious injury or death.
Conclusion
You have now completed the installation process. Enjoy your new roof! For further support, visit the official website or contact customer service.
DIY
CER ultratec houme shield inc. DIY product and project information is generally provided on an “as-is” basis, requiring users to assume all risks for safety, installation, and compliance with local building codes. Customers are responsible for their own safety and for ensuring projects are completed correctly as detailed in this DIYRoof disclaimer.
- Safety and Liability: Users must exercise common sense and adhere to safety regulations, accepting full responsibility for their actions during DIY projects.
- Accuracy: Project guides and product information are not guaranteed to be error-free or suitable for every situation.
- Returns: Special order DIY items may be subject to 25% restocking fee, and clearance items are generally non-refundable.
- Damaged/Used Items: Items damaged during personal installation, or, in some cases, used items, may not be eligible for return.
Always check the product detail screen for specific, item-dependent disclaimers and return policies before purchasing.
This disclaimer (“Disclaimer”) applies to the following product(s):Ultratec Home shield Coating provided by CER Ultratec Home shield Inc.
- “As-is” Basis
The product is provided on an “as-is” and “as-available” basis” basis without any warranties of any kind, either express or implied, including but not limited to implied warranties of merchantability, fitness for a particular purpose, title, or non-infringement. - Limitation of Liability
To the maximum extent permitted by law, CER Ultratec Home shield Inc. shall not be liable for any direct, indirect, incidental, consequential, or special damages arising out of or in any way connected with the use or misuse of this Product, including but not limited to damages for loss of profits, data, or personal injury. - User Responsibility
Users are responsible for ensuring the Product is used in accordance with all
provided instructions, safety guidelines, and applicable laws. Use of the product is
atthe user’s own risk. - Amendments
CER Ultratec Home shield Inc. reserves the right to amend this Disclaimer at any time. Changes will be effective immediately upon posting to our website.
